SICK G6L Instrucciones De Uso página 12

OPERATING INSTRUCTION
6.2 Sensing range
en
12 O P E R A T I N G I N S T R U C T I O N | GSE6L
Figure 5: Alignment
Check the application conditions: Adjust the distance between the sensor and the
reflector according to the relevant diagram [see
operating reserve).
When mounting multiple through-beam photoelectric sensors next each other, swap
the arrangement of the sender (GS6L) and receiver (GE6L) for every second pair.
Also maintain a sufficiently large distance between the pairs based on the light spot
diameter of the sender (GS6L). This will prevent any mutual interference from arising
[see figure 3].
Check the function as described in
described in table 3, check the application conditions.
Operating reserve
100
10
1
0 10 20
(32.80) (65.62)
Figure 6: Characteristic line, GSE6L
figure 6] (x = sensing range, y =
table 3. If the switching output fails to behave as
30 40
(98.43) (131.23)
Distance in m (feet)
8025390.1NSI/2024-05-24 | SICK
Subject to change without notice