Removing The Front Wheel - SWM SILVER VASE Manual Uso Y Mantenimiento

FORK FUNCTIONALITY CHECK
To check proper functioning of the front fork, oper-
ate as follows:
- get on the motorcycle;
- pull the front brake lever and forcefully push the
handlebar downwards a few times to check that
the fork extends and compresses correctly.
- If you notice oil leaks and jamming, have it checked
by an SWM dealer.
STEERING BEARING CHECK
Place the motorcycle on a stand in vertical position
and secure it so that it cannot overturn.
- Stand in front of the motorcycle.
- Firmly hold the lower part of both fork legs and
move the fork forward and backward checking
that there is no play.
WARNING*: If you feel any play during the move-
ment, have proper tightening of the steering bear-
ings checked by an SWM dealer.

REMOVING THE FRONT WHEEL

(SILVER VASE / GRAN TURISMO)
Position the motorcycle in such a way that the front
wheel is lifted from the ground.
- Loosen the bolts (1) holding the wheel axle (2) to
the front fork mounts.
- Unscrew the pin (2) and remove it.
- Remove the wheel being careful with the speed-
ometer transmission (3).
Note*: Do not operate the front brake lever when
the wheel has been removed; this causes the calliper
pistons to move outwards. After removal, lay down
the wheel with brake disc on top.
1
2
3
EN - 47