Idiomas disponibles
Idiomas disponibles
O
PTIONAL SETTING
Note:
• After setting "Auto Channel Scan", using [CH K / L] on the
remote control skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• If you press [POWER] or [SETUP] during auto channel
scan, the setting will be canceled.
• Channel settings will be saved even if the power fails.
• Even if "Autoscan" is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off
the unit by pressing [POWER].
18
EN
Channel List
The channels selected here can be skipped when selecting the channels
using [CH K / L ].
Those channels can still be selected with [the Number buttons].
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Channel List", then press
[ENTER].
4
Use [Cursor K / L] to select the channel you want to
skip, then press [ENTER].
•
The selected channel darkens in the channel list,
and it skips when selecting the channels by using
[CH K / L].
•
To re-register the skipping channels, use [Cursor K / L]
and press [ENTER]. The registered channels will be gray
in the channel list, and you can select those channels
by using [CH K / L] again.
•
When you skip a major channel, its minor channels
are skipped as well.
Note:
• The channel with "DTV" indicated on the display is ATSC.
Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
Channel List
Channel List
Highlight channels for Ch
DTV
DTV
6
6
Up/Down key selection.
27
DTV
DTV
8
8
9
9
DTV
48
DTV
48
58
58
DTV
67
BACK
Ch Select
Watch/Skip
Back
ENTER
