Tabla de contenido
Idiomas disponibles
Idiomas disponibles
11 - ESPECIFICAÇÕES TÉCNICAS
11.1 - ALIMENTAÇÃO
Tensão nominal: de acordo com a plaqueta de identificação do produto;
Tolerância de tensão: -10% a +10%;
Frequência: 50/60 Hz (48 Hz a 62 Hz);
Desbalanceamento de fase: ≤ 3% da tensão de entrada fase a fase nominal;
Intervalo mínimo entre partidas consecutivas: 5 minutos.
Máximo de 1 conexão a partir do ciclo de alimentação por 5 minutos.
11.2 - NORMAS E DIRETIVAS
Os motores WECM estão em conformidade com as versões mais recentes das seguintes normas
e regulamentos:
EN 60034-1: Rotating electrical machines - Part 1: Rating and performance
EN 60034-2-1: Rotating electrical machines - Part 2-1: Standard methods for determining
losses and efficiency from tests (excluding machines for traction vehicles)
EN 60034-5: Rotating electrical machines - Part 5: Degrees of protection provided by the
integral design of rotating electrical machines (IP code) – Classification
EN 60034-6: Rotating electrical machines - Part 6: Methods of cooling (IC code)
EN 60034-7: Rotating electrical machines - Part 7: Classification of types of constructions,
mounting arrangements and terminal box position (IM code)
EN 60034-8: Rotating electrical machines - Part 8: Terminal markings and direction of
rotation
EN 60034-9: Rotating electrical machines - Part 9: Noise limits
EN 60034-14: Rotating electrical machines - Part 14: Mechanical vibration of certain
machines with shaft heights 56 mm and higher - measurement, evaluation and limits of
vibration
IEC TS 60034-30-2: Rotating electrical machines - Part 30-2: Efficiency classes of
variable speed AC motors (IE-code)
IEC 60072-1: Dimensions and Output Series for Rotating Electrical Machines Part 1:
Frame Numbers 56 to 400 and Flange Numbers 55 to 1080
EN 60204-1: Safety of machinery - electrical equipment of machines - Part 1: General
requirements
IEC 61800-3: Adjustable speed electrical power drive systems - Part 3: EMC
requirements and specific test methods
IEC 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for
harmonic current emissions
IEC 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current ≤16A per phase and not subject to conditional connection
IEC 61800-5-1:2007: Adjustable speed electrical power drive systems - Part 5-1: Safety
requirements - Electrical, thermal and energy
2017/2102 (amending 2011/65/EU) - RoHS
2014/35/EU - The Low Voltage Directive (LVD)
2014/30/EU - Electromagnetic Compatibility (EMC) Directive
www.weg.net
WECM / Emerald eZA Manual
| 21
Tabla de contenido
