Yearly Maintenance; Other Maintenance - ADURO H1 Manual De Usuario

Ocultar thumbs Ver también para H1:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 114
Pellet container
Burn all pellets and brush the container clean.
6.3 Periodically maintenance – after about 500 hours of use
If the stove is placed in dusty surroundings, it can be necessary to clean the ventilator. Clean the burning
cave for ash and cinders, e.g. with a scraper. Clean the air pathway for electrical igniter for ash and cinders
that might be covering the hole placed on the left side of the tube under the burning cave, e.g. using a small,
straight screwdriver.
For further information regarding maintenance of the stove, please go to www.adurofire.com.

6.4 Yearly maintenance

The yearly maintenance must be conducted by a professional. Contact your local Aduro GO partner for
further information.
You can learn more on our website www.adurofire.com/aduro-hybrid.

6.5 Other maintenance

Gaskets
With time, gaskets around glass and door will wear. We recommend that you inspect them regularly. If
leakages appear, they must be replaced.
Combustion chamber
The fireproof tiles in the combustion chamber eventually wear out and should be replaced when the cracks
are more than 0.5 cm. The durability of the tiles depends on how often and how intensively the stove is used.
You can change the tiles yourself. They are available as a ready-to-use set. For further information, go to
www.aduroshop.com.
Cleaning the Aduro H1
The stove's surface is treated with a heat-resistant Senotherm® paint, which will stay at its best just by being
vacuumed with a small, soft mouthpiece or dusted with a soft, dry cloth. Do not use spirit or other solvents, as
they will remove the paint.
Do not clean the hybrid stove with water. If the stove is exposed to moisture,
the stove may develop rust.
The inside of the Aduro H1 and the flue pipe can be cleaned through the door or alternatively through the
cleaning aperture in the flue pipe/chimney. The upper fireproof tile (the exhaust deflector) can be removed.
To allow free access to the top of the Aduro H1 and the flue pipe, remove the exhaust deflector in steel.
Cleaning of the inside of the Aduro H1 and the flue pipe should be undertaken at least once a year, or more
68
Tabla de contenido
loading

Este manual también es adecuado para:

En13240-en14785 -ns3058

Tabla de contenido