Idiomas disponibles
Idiomas disponibles
6.7.4. Optimising voice control for your
television (optional)
You can now optimise voice control for your device. If you
want to use voice control without logging into your Goog-
le account, select USE ASSISTANT WITHOUT SIGNING
IN. If you do not want to configure any settings, select
SKIP.
A selection of apps will then be displayed which will be
installed when you continue with the TV setup. You can
select them with the arrow keys and deactivate or activate
them as desired. Select CONTINUE and press O K to
continue.
A range of information relating to the use of your Android
TV concerning Google Play, the Google voice assistant
and the Chromecast technology will then be displayed.
You can press O K or the button to skip these pages.
Optional (depending on country selection): Now
you will be asked to enter a 4-digit password.
Then select the desired TV mode (HOME or STORE).
Then select the desired energy option and press O K .
Activate the Chromecast technology if you would like
your TV to respond to cast commands as a cast device
when in sleep mode. To do so, select ON and press
O K .
.
Please note that enabling this function results
in higher energy consumption.
6.7.5. Sett ing up TV reception
Tuner mode
Please select your tuner mode:
Analogue: 0
Antenna: 0
Cable: 0
Satellite: 0
Select the required reception mode AERIAL, CABLE or
SATELLITE and press O K :
6.7.6. Aerial
.
Make sure that you have connected a DVB-T2
antenna to the ANT. connection.
Choose whether to search for analogue only, digital
only or for both analogue and digital channels and
press O K . The search then begins. If you do not want
to set up any TV channels, select SKIP SCAN and
press the O K or button.
6.7.7.
Cable
.
Make sure that your cable connection is con-
nected to the ANT. connection.
Select the desired provider.
Choose whether to search for analogue only, digital
only or for both analogue and digital channels and
press O K . If you do not want to set up any TV chan-
nels, select SKIP SCAN and press the O K or but-
ton.
The following options are then available:
SCAN MODE
FREQUENCY (KHZ)
(only in the search mode
ADVANCED or QUICK)
NETWORK ID
(only in the search mode
ADVANCED or QUICK)
Then press the button to start the scan.
6.7.8. Satellite
.
Select NEXT if you do not want to configure additional
settings. Select MORE if you want configure additional
settings. The following options are available here:
SINGLE
Aerial
Cable
TONE BURST
Satellite
Next
DISEQC .
DISEQC .
DISEQC .
UNICABLE I
UNICABLE II
To start the LNB search, select NEXT > SCAN and
press O K or . The LNB search is started.
Under MORE, if you have selected UNICABLE I or
UNICABLE II, the following setting options are avail-
able:
Cable scan configure
Select the required search
mode FULL (only for provid-
er selection OTHERS), AD
VANCED or QUICK here.
Set the frequency here.
Set the network ID here.
Make sure that your satellite connection is
connected to the LNB connection.
MORE
Select the required satellite here.
If your satellite system requires a
tone burst, you can set it to TONE
BURST A or B here.
If you have connected multiple LNBs
or a DiSEqC switch to your satellite
antenna, select DiSEqC 1.0 here.
If you have connected multiple LNBs
or a DiSEqC switch to your satellite
antenna, select DiSEqC 1.1 here.
If you have connected multiple LNBs
or a DiSEqC switch to your satellite
antenna, select DiSEqC 1.2 here.
Select the Unicable I settings (TUN
ER and BAND FREQUENCY) here.
Select the Unicable II settings (TUN
ER and BAND FREQUENCY) here.
EN
13
