Idiomas disponibles
Idiomas disponibles
• Work in well-lit environments (the average operating illuminance value for mechanic
workshops and assembly on work benches for precision work is 500-750-1000 lux).
3.6 Guide Lines for Handling the Tanks
• Do not remove, tamper with or modify in any way the tank safety valve guard or any
other related safety device, nor during transportation, nor while handling, nor while using
the tanks themselves.
• Do not change, modify, tamper with or block the safety devices.
• Do not perform repair operations on the tanks or the valves.
• Do not lift the tanks by the safety valve guard, do not drag them, make them roll or slide
on the floor.
• Do not use magnetic lifts, ropes or chains to lift the tanks.
• Do not handle the tanks with hands or gloves with oil, grease or any substance that does
not allow a safe grasp.
• If it is necessary to move the tanks manually, they must be kept in an upright position,
slightly tilted, and must be rolled on the edge of their base.
• Avoid severe impacts, falls and any type of mechanical stress that may compromise the
integrity and resistance of the tanks.
• Do not use the tank for different purposes than containing the specific gas for which they
were built and tested.
• When using the gas through a rubber hose, this must be secured with appropriate means
to prevent it from coming off; makeshift fastening must be avoided.
3.7 Precautions for Storing the Tanks
The tanks must be perfectly clean and clearly marked in order to identify their contents easily,
from the moment they arrive in the workshop until they are eventually returned to the supplier.
For treatment and storage, please refer to the safety sheet of the gas and tank.
• Do not remove, alter, delete any of the devices (tag, label, sticker, etc.) placed by the
gas supplier to identify the tank's contents.
• Store the unused tanks:
○ in appropriate environments, adequately ventilated;
○ away from direct sunlight and bad weather;
○ with the valve firmly closed;
○ anchored in order to prevent impacts and falls.
3.8 Safety Devices
The recovery unit is equipped with the following safety devices:
• Safety valve: it opens completely if the operating value (20 bar) is reached.
Tampering with the above mentioned safety devices in any way is strictly forbidden.
TEXA S.p.A. declines any liability for damages to people or things caused by
unapproved changes, even partial, made to the equipment.
en
39
