Idiomas disponibles
Idiomas disponibles
Polaris
PIXEL
Cordless Robotic Cleaner | Owner's Manual
®
™
4.4
Replacing Wear Parts
4.4.1 Replacing Brushes
The cleaner is fitted with PVC brushes with a
"wear" indicator.
Figure 15. Worn Brush Indicator
To maintain cleaner performance at its best you
need to replace the brush as soon as one of the
wear indicators is reached (even if the blade wear
is not even). It is recommended that you replace
the brush when the rubber is worn down to the top
of the wear indicator (or every two years, whichever
comes first).
To replace a worn brush:
1.
Separate the edges of the brush and undo the
tabs. Remove the worn brushes.
Figure 16. Undo the Tabs of the Brush
Raised groove
becomes partially
flattened, indicating
excessive wear
2.
To install the new brush, position the new
brush on the roller with the cleaning blades
facing away from the roller.
Figure 17. Install the New Brush
3.
Thread each tab into the slot provided and
gently feed it through until the heel comes out
at the other side of the slot.
Figure 18. Pull Tabs Through Each Slot
4.
Use a pair of scissors to cut the tabs 3/4 inch
from the heel so that they are no higher than
the cleaning blade.
Figure 19. Cut Tabs
ENGLISH
Page 11
