Idiomas disponibles
Idiomas disponibles
Brewing
This is the temperature
temperature
of the water in the ther-
moblock. It is therefore
not the temperature
of the beverage in the
cup or the temperature
of the beverage at the
moment of release from
the outlets of the filter
holder.
Water
hardness
Auto-off
3. Exit the menu
After 15 seconds of inactivity, the machine automatically exits
the settings menu.
Please note:
•
The light corresponding to the changed setting flashes
quickly to confirm the change.
•
Press
to select Low
10. DEFAULT VALUES (RESET)
temperature
This resets the machine to the default values.
Proceed as follows:
Press
to
1. Position the steam wand (A11) on the drip tray (A9);
Medi-
select
2. Access the settings menu.
um temperature
3. Turn the steam dial (A12) to the
Press
to
4. Press the
High
select
temperature
5. The
When the steam dial has been closed, the appliance is ready for
use.
11. CLEANING THE MACHINE
The following parts of the machine must be cleaned regularly:
Press
•
to select Low
•
hardness
•
•
Press
to
•
Medi-
select
um hardness
Important!
•
•
Press
to
select the High
•
hardness
•
Press
9
to
select
minutes
Danger!
•
Press
30
to select
•
minutes
Press
to
select 3 hours
11.1 Cleaning the drip tray
Important!
The drip tray is fitted with a level indicator (red) showing the
level of water it contains. Before the indicator protrudes from the
cup tray (fig. 25), the drip tray must be emptied and cleaned,
otherwise the water may overflow the edge and damage the
appliance, the surface it rests on or the surrounding area.
1. Remove the drip tray (A9) (fig. 26).
2. Remove the cup grille (A7), empty the water and clean the
26
After 15 seconds of inactivity, the machine automatically
exits the settings menu and is ready for use.
button. The three lights flash simulta-
neously to confirm that the original settings have been
restored.
and
lights flash to indicate that the steam
dial must be closed again (○ symbol).
drip tray (A9)
coffee filters (C2), (C3) and (C4);
coffee spouts (A5);
water tank (A3);
steam wand (A11) as described in section "7.2 Cleaning the
steam wand";
None of the components or accessories is dishwasher safe.
Do not use solvents, abrasive detergents or alcohol to clean
the coffee machine.
Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
If the appliance is not used for more than a week, before
using it again, we recommend you perform a rinse cycle as
described in section "3. Setting up the appliance".
Never immerse the coffee maker in water when cleaning: it
is an electrical appliance.
Before commencing any cleaning operation on the outside
of the machine, turn it off, unplug it from the mains socket
and wait for it to cool down.
tray with a cloth, then reassemble the drip tray. Extract the
position;
