Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Locate the Left Side Panel (D) and place it on a
soft surface to protect the finish. Insert four Cam
Bolts (AA) into the threaded holes in the Left
Side Panel (D). Fully tighten the Cam Bolts (AA)
with a screwdriver. Locate the Right Side Panel
(E) and place it on a soft surface to protect
the finish. Insert four Cam Bolts (AA) into the
threaded holes in the Right Side Panel (E). Fully
tighten the Cam Bolts (AA) with a screwdriver.
8. Insert six Wood Dowels (CC) into the
unthreaded holes on the Left Side Panel (D)
and insert six Wood Dowels (CC) into the
unthreaded holes on the Right Side Panel (E)
as shown in the diagram. Align the holes in the
mantel assembly with the Wood Dowels (CC)
in the Left Side Panel (D) and push the parts
together. Align the holes in the mantel assembly
with the Wood Dowels in the Right Side Panel
(E) and push the parts together. Attach the Left
and Right Side Panels (D & E) by using eight
Cam Locks (BB) as shown in the cam lock
assembly guide. Insert four Bolts (EE) through
the Base Panel (B) and into the Left and Right
Side Panels (D & E). Fully tighten the Bolts (EE)
with a screwdriver.
9. Locate the Upper Back Panel (L) and the two
Side Back Panels (M) and attach them with
forty-four Back Panel Screws (DD) as shown
in the diagram. Fully tighten the Back Panel
Screws (DD) with a screwdriver.
7
AA
8
D
CC
EE
9
M
DD
6
D
E
CC
BB
E
L
M
