Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Locate the Media Shelf (C) and place it on a
soft surface to protect the finish. Insert six Cam
Bolts (AA) into the threaded holes in bottom
of the Media Shelf (C). Fully tighten the Cam
Bolts (AA) with a screwdriver. Place the Media
Shelf (C) on edge and insert four Wood Dowels
(CC) into the unthreaded holes between it and
the Media Partitions (J). From the bottom of the
Media Shelf (C) install two Screws (JJ) into the
Media Partitions (J). Fully tighten the Screws
(JJ) with a screwdriver. Set aside for step 3.
2. Locate the Left and Right Inside Panels (F &
H) and the Top Trim (G) and insert two Wood
Dowels (CC) into the unthreaded holes between
them and push the parts together.
3. Locate the Media Shelf (C) and align it with the
Left and Right Inside Panel (F & H) and the Top
Trim (G) and insert six Wood Dowels (CC) into
the unthreaded holes between them. Push the
parts together. Attach the Left and Right Inside
Panels (F & H) and the Top Trim (G) to the
Media Shelf (C) by using six Cam Locks (BB) as
shown in the cam lock assembly guide below.
1
JJ
2
F
3
F
CC
BB
4
AA
C
J
J
C
CC
CC
G
H
C
G
H
