Dräger HPS 3500 Instrucciones De Uso página 7

1 Safety-related information
Both the latest edition and other languages of these
instructions for use can be downloaded in the
Technical Documentation database
(www.draeger.com/ifu). Due to product
actualisations, Dräger recommend always using the
latest edition of the instructions for use.
Before using this product, carefully read these Instructions

for Use and those of the associated products.
Strictly follow the Instructions for Use. The user must fully

understand and strictly observe the instructions. Use the
product only for the purposes specified in the Intended use
section of this document.
Do not dispose of the Instructions for Use. Ensure that they

are retained and appropriately used by the product user.
Comply with all local and national rules and regulations

associated with this product.
Only trained and competent personnel are permitted to

inspect, repair and
recommends a Dräger service contract for all maintenance
activities and that all repairs are carried out by Dräger.
Only authentic Dräger spare parts and

accessories may be used for maintenance. Otherwise the
proper functioning of the product may be impaired.
Do not use a faulty or incomplete product. Do not modify

the product. The product must not be fitted with third-party
components.
Notify Dräger in the event of any product or component

fault or failure.
Incorrect or third-party inner fittings, the drilling of new

holes for accessories or other modifications to the helmet
may adversely affect the protective function and invalidate
any approval.
When fitted with another item of personal protective
equipment or with an accessory other than as supplied by
the helmet manufacturer for use with this helmet, a helmet
marked as complying with this European standard might no
longer satisfy all clauses of this European standard.
This helmet complies with the requirements of the

European standards when the chin strap supplied by the
helmet manufacturer is worn and adjusted in accordance
with these instructions.
The HPS 3500 helmet, for use in water according to the

requirements of EN 1385:2012, must be used with the
retention system without the chin cup.
2 Conventions used in this
document
Definition of alert icons
The following alert icons are used in this document to provide
and highlight areas of the associated warning text that require
greater awareness from the user. The meanings of the alert
icons are defined as follows:
Dräger HPS 3500
service the product.
WARNING
!
Indicates a potentially hazardous situation.
If not avoided, it could result in death or serious injury.
CAUTION
!
Indicates a potentially hazardous situation. If not
avoided, it could result in physical injury, or damage to
the product or environment. It may also be used to
alert against unsafe practices.
Dräger
Safety-related information
7