Idiomas disponibles
Idiomas disponibles
USING YOUR 2-IN-1 CLEANER
CHARGING ON THE DOCK
CORD WRAP
Charge the unit by placing it on the Storage and Charging Dock. Make sure the contacts on the body are
aligned with the contacts on the charging dock.
The Battery Icon on the main body will illuminate when charging begins.
When charging is complete and you need to use the unit again, lift it off the dock.
NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When
charging is complete, all three indicator lights will turn off.
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 4
hours). Leaving the unit plugged in will not damage battery life.
s h a r kc l e a n . e u
CONTACTS
DOCK CHARGING
USING YOUR 2-IN-1 CLEANER
FILLING THE CLEAN SOLUTION TANK
REMOVE THE CLEAN SOLUTION TANK
Press the release button and lift off the Clean Solution Tank.
FILL THE CLEAN SOLUTION TANK
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface
Cleaning Solution, filling to the SOLUTION line. Replace the cap and reinsert the tank until it clicks into place.
The top of the tank should be flush with the top of the body.
NOTE: Only use Shark HydroVac Multi-Surface Cleaning Solution and water with this product.
1
2
s h a r kc l e a n . e u
