VTech DM1111 Guia De Inicio Rapido página 5

3
Power on the baby monitor
Press . The POWER
light turns on.
4
Positioning the baby monitor
> 1m
> 3ft (1m)
Caution
•
The default volume of your parent unit is Level 3, and the maximum
volume is level 5. If you experience high-pitched screeching noise from
your baby monitor while positioning:
- Make sure your baby unit and parent unit are more than 2 metre apart, OR
- Turn down the volume of your parent unit.
Press and hold until the
POWER / LINK light turns on.
> 2m
> 6.5ft (2m)
< 2m
< 6.5ft (2m)
8
5
Before use
You may test the baby monitor before initial use, and at regular
times thereafter.
1. Make sure your baby unit and parent unit are on.
2. Speak towards the microphone of the baby unit. You will
hear the sound at the parent unit, and see the visual sound
indicators light up.
>6.5ft (2m)
Caution
• For hearing protection, make sure the parent unit is more than 2 metres
away from the baby unit. If you hear any high-pitched noise, move the
parent unit further until the noise stops.
You can also press on the parent unit to lower or mute the noise.
NOTE NOTES
• When the POWER/LINK LED light flashes, move the parent unit closer to
the baby unit (observe the minimum distance of 2 metres). You can also
check if the baby monitor is connected to a live power socket and switched
on.
9