Idiomas disponibles
Idiomas disponibles
USER GUIDE
ASSEMBLY INSTRUCTIONS
ASSEMBLING THE HANDLES
1. The handles and middle handle need to be
secured in place before the unit can be used.
2. Place the middle handle onto the lower
handle frame so that it bends in the
direction of the user. Ensure that the holes
in the bars of both handle frames are in
alignment. Using two screws, two handle
fasteners and two nuts, fix the handles
together. The handle fasteners can be
positioned on the inside or outside of the
handles.
3. Attach the left and right handles to the
middle handle frame with the remaining two
nuts, two screws and two handle fasteners.
4. The connecting rod acts as an additional
support to the handle frame. Insert each threaded end of the connecting rod through
the corresponding holes in the left and right handles. If fitting the connecting rod is
difficult, loosen one of the handle fasteners on the handles.
5. Cap the threaded ends of the connecting rod with the nuts supplied. Ensure everything
is securely tightened.
6. Use the cable ties to fasten the cable container to the middle handle frame and the right
handle. Make sure the cable container follows the curve of the handle, and that there is
no overhang. Do not place tension on the cable.
08
2. Place the middle handle onto the lower handle frame so that it bends
the direction of the user. Ensure that the holes in the bars of both hand
frames are in alignment. Using two screws, two handle fasteners and tw
nuts, fix the handles together. The handle fasteners can be positioned
the inside or outside of the handles.
3. Attach the left and right handles to the middle handle frame with t
remaining two nuts, two screws and two handle fasteners.
4. The connecting rod acts as an additional support to the handle frame. Inse
each threaded end of the connecting rod through the corresponding hol
in the left and right handles. If fitting the connecting rod is difficult, loos
one of the handle fasteners on the handles.
5. Cap the threaded ends of the connecting rod with the nuts supplied. Ensu
everything is securely tightened.
6. Use the cable ties to fasten the cable container to the middle handle fram
and the right handle. Make sure the cable container follows the curve of t
handle, and that there is no overhang. Do not place tension on the cable.
Handle Fastener
Nut
Bolt
Middle handle
Handle Fastener
Nut
Bolt
Lower handle
