Idiomas disponibles
Idiomas disponibles
WARNING
product damage due to a short circuit, never
immerse your tool, battery pack or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
VARIABLE-SPEED TRIGGER SWITCH (FIG. 8)
Your tool is equipped with a variable-speed
trigger switch. The tool can be turned ON or
OFF by depressing or releasing the variable
speed trigger switch.
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
This impact wrench must be used only with the battery packs and chargers listed below:
2.0Ah
2.5Ah
3.5Ah
FX0311 FX0111 FX0321 FX0121 FX0331 FX0221 FX0341 FX0231
NOTE: Please refer to the battery pack and charger manuals for detailed operating
instructions.
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
Battery Pack
5.0Ah
6Ah
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
parts.
Fig. 8
Variable-speed
Trigger Switch
8.0Ah
10Ah
12Ah
-14-
To prevent accidental
starting that could cause
Charger
FLEX
FLEX
FLEX
FX0411
FX0421
FX0431
FLEX
FX0451
