Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Instruction Manual
- Connect the coupling to the pressure washer
by pulling the lock back and pressing it towards
the machine.
- After connecting the coupling, check if it is
firmly attached so it will not come loose during
operation.
11. Assembling and using the suction filter.
- This pressure washer has a system that allows
you to draw water from a tank or cistern. To do
that, use a 1/2" diameter hose, maximum 7.5 m
length and attach the water suction filter to the
end of the hose.
ATTENTION: never draw water from a tank
or cistern without using the filter. Do not draw
water from great depths. Maximum difference
in water level: 0.5 m.
12. Remove air trapped in the hose.
- Always remove all the air trapped in the hose
before running the machine.
- Run the faucet or water supply register with
the pressure washer off and press the trigger
until all the air has come out.
NOTE: never run the pressure washer with air
in the hoses, which can damage the motor.
42550 - High-pressure Washer 1600 psi
25
Tabla de contenido
