Manual Freewheel Lever
Whenever you need or want to push your scooter
for short distances, you can put it in freewheel
mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system.
This will enable you to push the scooter.
NOTE: If your scooter is equipped with a
2-position manual freewheel lever, you must pull
up on the lever and then push forward on the
manual freewheel lever to disable the drive system
and the brake system. This will enable you to push
the scooter.
3. Pull back on the manual freewheel lever to
reengage the drive and the brake systems and
take your scooter out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
After you have fi nished pushing your scooter, always return it to the drive mode to lock the
brakes.
NOTE: If the scooter is placed in freewheel mode (manual freewheel lever forward) while the key is in the
"on" position, the scooter will not run until the manual freewheel lever is pushed rearward and the key is
turned to the "off" position, then back to the "on" position.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your scooter's
batteries into the controlled mechanical energy that drives the scooter's wheels.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your scooter. They are bolted to the frame at
the rear of the scooter.
PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorized by your Provider.
WARNING! The anti-tip wheels may cause interference with the smooth transition of your scooter
when ascending or descending a curb. Contact your authorized Provider for more information.
Mid-size Scooter Series
I I . Y O U R S C O O T E R
Figure 5. Rear Components
IDENTIFICATION KEY
1.
MANUAL FREEWHEEL LEVER
2.
MOTOR/TRANSAXLE ASSEMBLY
3.
ANTI-TIP WHEELS
4.
SAFETY FLAG BRACKET
2
3
4
1
13