Unpacking/Delivery; Safety; Symbols; General Instructions - Clarke CR 28 BOOST Libro De Instrucciones

UNPACKING/DELIVERY

To unpack the machine carefully follow the instructions on the packing.
Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fi ll in a damage claim.
Check that the machine is equipped with the following features:
– Technical documents:
• Scrubber-dryer Operator's Manual
• Electronic battery charger Manual (integral part of this manual)
• Scrubber-dryer Spare Parts List
– No. 2 lamellar fuses
– No. 5 spacers for 6 V battery housing
– One 2 mm-wrench for socket screws

SAFETY

The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.

SYMBOLS

DANGER!
It indicates a dangerous situation with risk of death for the operator.
WARNING!
It indicates a potential risk of injury for people or damage to objects.
CAUTION!
It indicates a caution or a remark related to important or useful functions. Pay careful attention to the
paragraphs marked by this symbol.
NOTE
It indicates a remark related to important or useful functions.
CONSULTATION
It indicates the necessity to refer to the Operator's Manual before performing any procedure.

GENERAL INSTRUCTIONS

Specifi c warnings and cautions to inform about potential damages to people and machine are shown below.
DANGER!
– Before performing any maintenance, repair, cleaning or replacement procedure the battery connector must
be disconnected and the key must be removed from the ignition switch.
– This machine must be used by properly trained operators only.
– Keep the battery far from sparks, fl ames and incandescent material. During normal operation, explosive
gases are released.
– Do not wear jewelry when working near electrical components.
– Do not work under the lifted machine without supporting it with safety stands.
– Do not operate the machine near toxic, dangerous, fl ammable and/or explosive powders, liquids or vapors.
This machine is not suitable for picking up hazardous materials.
– Battery charging produces highly explosive hydrogen gas. Keep the tank assembly open during battery
charging and perform this procedure in well-ventilated areas and away from open fl ames.
WARNING!
– Carefully read all the instructions before performing any maintenance/repair procedure.
– Before using the battery charger, ensure that frequency and voltage values, indicated on the machine serial
number plate, match the electrical mains voltage.
– To reduce the risk of fi re, electric shock, or injury, do not leave the machine unattended when it is plugged
in. Unplug the machine from the electrical mains when not in use and before servicing.
– Keep the battery charger cable away from heated surfaces.
Operator's Manual - CR 28 BOOST®
ENGLISH
3