Security Warnings; Precautions Before Use - VISIOMED bewell connect MyThermo Manual De Usuario

Dear customer,
Thank you for buying the BewellConnect® Infrared medical thermometer. We hope you get the
best use out of it, and we recommend that you read these instructions carefully so that you can
use it as effectively as possible.
To gain the best treatment from your MyThermo device, please follow the treatment instructions
in this user manual when using the device.
For specific information about vein, muscle, or other problems, PLEASE CONTACT YOUR
DOCTOR.

1. SECURITY WARNINGS

- Follow the maintenance advice stipulated in this instruction manual.
- This device may be used for personal home use.
- This device must only be used for the purposes described in this instruction manual.
- This device must only be used in an ambient temperature range of between 59°F and 104°F /
15°C and 40°C.
- This device must always be kept in a clean, dry area.
- Do not expose this thermometer to electric shocks.
- Do not expose this thermometer to extreme temperature conditions of > 122°F or < -4°F /
> 50°C or < -20°C.
- Do not use this device in relative humidity lower than 10% and higher than 85%.
- Do not expose the thermometer to sunlight or to water.
- Do not use this device outside.
- Never drop the device.
- Should a problem occur with your device, please contact customer service. Do not attempt to
repair this device yourself.
- Keep the thermometer out of reach of children.
- This MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding Electromagnetic
-
Compatibility (EMC) and needs to be used according to the EMC information provided in the
EMC DATA at the end of this manual.
- TV, portable and mobile RF communication equipment near the device might affect
measurements.
- The measurement data of this product is for reference only. If you have any doubt, please
contact your doctor.
- This device should not lead to modification of your existing medical treatment.
- Stop using the device in case of anomaly or dysfunction.

2. PRECAUTIONS BEFORE USE

THIS DEVICE IS PRE-SET AT THE FACTORY. IT IS NOT NECESSARY TO CALIBRATE IT WHEN
STARTING IT UP.
BewellConnect - BW-CX10 - User Manual - 042017v3 9