Downloading The Application; Mythermo Bw-Cx10 First Setup; Settings; Choosing The Temperature Mode - VISIOMED bewell connect MyThermo Manual De Usuario

7. DOWNLOADING THE APPLICATION

Download the BewellConnect® application to your smartphone or tablet :
- via the App Store or Google Play
- by scanning the QR Code on the side of the box.
Then click on the MyThermo icon.
The results are immediately transferred by the application via Bluetooth 4.0 Smart Ready.

8. MYTHERMO BW-CX10 FIRST SETUP

- Connect the USB cable of your device to your computer to charge the device. Once the
charging is complete, you can unplug the cable.
- For the first use, please wait 10 minutes for the device to warm-up.
- Aim the device toward the temporal lobe or one side/temple of the forehead, as shown in
the FIGURE PAGE 2), at a distance of 1-2 in / 2-5 cm. Press the measurement button of the
A
device. Temperature is displayed immediately.
- Before each measurement, please make sure, your hair and any sweat has been removed from
your forehead.
- You can then transfer your measurement in one click by pressing the transfer button, to the
BewellConnect application and monitor your temperature measurements.
- Charge the device when

9. SETTINGS

9.1. CHOOSING THE TEMPERATURE MODE

The MyThermo BW-CX10 is specially designed to measure body temperature of children and/or
adults without any physical contact. It can be used by consumers in a home environment as well
as in a medical setting. as reference. For this, use the BODY mode.
Measurement range for BODY mode: 89.6°F – 109.4°F / 30°C to 43°C.
Note : You can also use the MyThermo BW-CX10 to measure the temperature of an area or an
object or a room temperature. For this, use the SURFACE TEMP mode.
Measurement range for SURFACE TEMP mode: 32°F - 199.9°F / 0°C - 93.3°C.
By selecting the ROOM Mode, it will display the ambient temperature of the room you are in.
Press the MODE button for one second, the screen will display: BODY for the body measurement
temperature. Press the MODE button again to switch to SURFACE TEMP or ROOM mode.
Note: The MyThermo BW-CX10 is automatically set to BODY.
Important: The surface temperature differs from the internal body temperature. To obtain the
internal temperature, always use the BODY mode.
Please make sure to select the BODY mode for an internal temperature reading and the SURFACE
TEMP mode or the ROOM mode for an external area reading.

9.2. CHOOSING THE TEMPERATURE UNIT

Press the °C/°F button to select the temperature unit. The symbol of the chosen temperature
unit is displayed (°C for Celsius degrees and °F for Fahrenheit degrees).
shows on the screen.
BewellConnect - BW-CX10 - User Manual - 042017v3 13