Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Install two Wood Dowels (CC) into the
unthreaded holes in the face of the Right Side
Panel (E). Align the unthreaded holes in the
Right Trim (H) with the Wood Dowels (CC) in
the Right Side Panel (E) and push the parts
together. Attach the Right Trim (H) by using
two Cam Locks (BB) as shown in the cam lock
assembly guide.
8. Insert six Wood Dowels (CC) into the
unthreaded holes on the Left Panel (D)
and insert six Wood Dowels (CC) into the
unthreaded holes on the Right Panel (E). Insert
two Wood Dowels (CC) in the holes in the Top
Trim (G) as shown in the diagram. Align the
holes in the mantel assembly with the Wood
Dowels (CC) in the Left Panel (D) and push the
parts together. Align the holes in the assembly
with the Wood Dowels (CC) in the Right Panel
(E) and push the parts together. Attach the Left
and Right Panels (D & E) by using eight Cam
Locks (BB) as shown in the cam lock assembly
guide. Insert four Bolts (EE) through the Base
Panel (B) and into the Left and Right Panels
(D & E). Fully tighten the Bolts (EE) with a
screwdriver.
9. Locate the Ppper Back Panel (L) and the Side
Back Panel (M) and attach them with thirty Back
Panel Screws (DD) as shown in the diagram.
Fully tighten the Back Panel Screws (DD) with a
screwdriver.
7
CC
8
D
EE
CC
9
DD
6
BB
H
E
CC
BB
CC
E
L
M
