Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Locate the Media Shelf (C) and place it on a
soft surface to protect the finish. Insert four Cam
Bolts (AA) into the threaded holes in bottom
of the Media Shelf (C). Fully tighten the Cam
Bolts (AA) with a screwdriver. Place the Media
Shelf (C) on edge and insert two Wood Dowels
(CC) into the unthreaded holes between it and
the Media Partition (J). From the bottom of the
Media Shelf (C) install one Screw (JJ) into the
Media Partition (J). Fully tighten the screw (JJ)
with a screwdriver.
2. Locate the Inside Panel (F) and the Top Trim
(G) and insert two Wood Dowels (CC) into the
unthreaded holes between them. Install four
Wood Dowels (CC) into the unthreaded holes
in the bottom of the Media Shelf (C). Align the
unthreaded holes in the Inside Panel (F) and
the Top Trim (G) with the Wood Dowels (CC) in
the Media Shelf (C) and push the parts together.
Attach the Inside Panel (F) and the Top Trim (G)
to the Media Shelf (C) by using four Cam Locks
(BB) as shown in the cam lock assembly guide.
3. Locate the Top Panel (A) and place it on a soft
surface to protect the finish. Insert two Cam
Bolts (AA) into the threaded holes in bottom of
the Top Panel (A). Fully tighten the Cam Bolts
(AA) with a screwdriver. Set aside for step 5.
Locate the Base Panel (B) and place it on a
soft surface to protect the finish. Insert two Cam
Bolts (AA) into the threaded holes in top of the
Base Panel (B). Fully tighten the Cam Bolts (AA)
with a screwdriver.
1
JJ
2
F
3
4
AA
C
J
CC
C
CC
G
CC
BB
AA
A
AA
B
