Idiomas disponibles
Idiomas disponibles
10 .- After the process, turn the speed selector to the minimum position "0?, turn off the
ON/OFF switch, and you will hear a sound that confirms that the machine is turned off,
engage the locking lever to raise the head by 45º.
11 .- Remove the used rod. Lift it up, and turn it clockwise and pull down to extract it.
12 .- Remove the bowl or its contents, clean the remnants of the bowl with a silicone or wood
spatula to avoid scratching the surface.
13 .- Clean the bowl and the used rod with soapy water, dry them and leave them ready for
future use.
MAINTENANCE & CLEANING
GENERAL
The Electric blender-mixer are designed for maximum durability and performance, with mini-
mum maintenance
TO AVOID ANY INJURY, TURN THE POWER SWITCH OFF, UNPLUG THE UNIT FORM THE
POWER SOURCE AND ALLOW TO COOL BEFOR PERFORMING ANY MAINTENANCE.
OUTSIDE CLEANING
To preserve the bright finish of the unit, it is recommended that the exterior surfaces be wiped
daily with a damp cloth. Stubborn stains may be removed with a good stainless steel cleaner or
non-abrasive cleaner. Difficult to reach areas should be cleaned with a small brush and mil
soap.
CAUTION
USE ONLY NON-ABRASIVE CLEANERS. ABRASIVE CLEANERS COULD
SCRATCH THE FINISH OF YOUR ELECTRIC BLENDER-MIXER MARRING ITS
APPEARANCE AND MAKING IT SUSCEPTIBLE TO SOIL ACCUMULATION.
22
