Idiomas disponibles
Idiomas disponibles
201112105
93-2709.qxd
Basic Operation
Storage & Service
Storage
CAUTION! Your UPS has an internal power source. Its outlets may still deliver current, even after the UPS
is unplugged, until the UPS is completely turned OFF (deactivated). Before storing your UPS, turn it
completely OFF: with the UPS ON and receiving utility power, press and hold the POWER button for one
second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall
outlet. If you store your UPS for an extended period of time, recharge the UPS batteries once every three
months: plug the UPS into a wall outlet; allow it to charge for 4 to 6 hours; and then unplug it and place it
back in storage. Note: after you plug the UPS in, it will automatically begin charging its batteries; however,
it will not supply power to its outlets (see Quick Installation section). If you leave your UPS batteries
discharged for an extended period of time, they will suffer a permanent loss of capacity.
Service
A variety of Extended Warranty and On-Site Service Programs are also available from Tripp Lite. For more
information on service, visit www.tripplite.com/support. Before returning your product for service, follow
these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does
not originate from a misreading of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit
www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From
here you can request a Returned Material Authorization (RMA) number, which is required for service. This
simple on-line form will ask for your unit's model and serial numbers, along with other general purchaser
information. The RMA number, along with shipping instructions will be emailed to you. Any damages (direct,
indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp
Lite service center is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite
service center must have transportation charges prepaid. Mark the RMA number on the outside of the package.
If the product is within its warranty period, enclose a copy of your sales receipt. Return the product for service
using an insured carrier to the address given to you when you request the RMA.
12/29/2011
4:28 PM
continued
dial is turned clockwise, the UPS becomes more tolerant of variations in its
input power's AC waveform. NOTE: The further the dial is adjusted clockwise,
the greater the degree of waveform distortion the UPS will allow to pass to
connected equipment. When experimenting with different settings for this dial,
operate connected equipment in a safe test mode so that the effect on the
equipment of any waveform distortions in the UPS's output can be evaluated
without disrupting critical operations.
8
Page 8
