Bosch Rexroth HQ 2/U Instrucciones De Montaje página 57

Connect the HQ 2/U to
the compressed air supply.
The HQ 2/U is set to
an even, smooth lifting
movement in delivery
condition.
Throttle the inlet air to
adjust the speed of the
raising lift:
• Turn towards "+" to make
the raising lift slower.
• Turn towards "–"
to make it faster.
7.5.4 Pneumatically connecting the product
High pneumatic pressure!
Danger of severe injuries or death.

Switch off the compressed air supply for the relevant system component
before pneumatically connecting, assembling or disassembling the product.

Protect the system against being switched on.
• For a specifi cation of the compressed air and operating pressure, see page 37.
A
Fig. 7: Pneumatics diagram
7.5.5 Adjusting the lifting velocity
Fig. 8: Adjusting the lifting velocity
WARNING
B
1
ø6x1
3 842 546 879/2015-07, MIT: HQ 2/U, Bosch Rexroth AG
Assembly 19/38
546 879-06
+
–
546 879-07