Bosch Rexroth HQ 2/U Instrucciones De Montaje página 66

Unidad de elevación y transporte transversal
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 155
28/38
Maintenance and Repair
Bosch Rexroth AG, MIT: HQ 2/U, 3 842 546 879/2015-07
10 Maintenance and Repair
High electrical voltage!
Danger of severe injuries or death due to electric shock.
Make sure the relevant system component is not under pressure or voltage
before performing any maintenance or repair work.
Protect the system against being switched on.
High pneumatic pressure!
Danger of severe injuries or death.
Switch off the compressed air supply on the relevant system component before
performing any maintenance or repair work.
Protect the system against being switched on.
Hot electric motor surfaces during operation!
Possible burns if the hot surfaces (over 65°C) are touched.
Provide appropriate safety devices to seal off the motors.
Let the system cool off for at least 30 min. before performing any maintenance
or repair work.
• Continuous conveyors that are in motion or operation may only be inspected or
adjusted if protective devices are present and correctly positioned.
• Observe DIN EN ISO 13857 when removing or replacing protective devices and/or
deactivating safety devices.
• Test runs with open housings are only permitted when they are performed by
skilled workers using hold-to-run controls and when the infl uence of all other
switching devices can be excluded.
10.1 Cleaning and care
Bearing malfunctions
Moistening of the bearings with grease-dissolving substances, e.g. for cleaning
purposes, will lead to bearing malfunctions. There is a danger of damage
to property; the service life may be shortened.
Keep grease-dissolving or aggressive cleaning agents away from the bearings!
Only use a slightly damp cloth to clean the product.
Toothed belt malfunctions
Moistening of the toothed belt with grease-dissolving substances, e.g. for cleaning
purposes, will lead to toothed belt malfunctions. There is a danger of damage
to property.
Keep grease-dissolving or aggressive cleaning agents away from the toothed belts!
Only use a slightly damp cloth to clean the product.
WARNING
CAUTION
NOTICE
loading