Idiomas disponibles
Idiomas disponibles
B
Product usage
Charging the vacuum cleaner
Fully charge the vacuum cleaner before the first use, after each use, or whenever the battery
level is low.
Before first use:
•
Remove the plastic tab on the battery pack.
Before charging:
Always attach the filters to the main unit (see Detaching the filters in the Cleaning and
•
Maintenance section).
•
When the battery level is low, the circular battery indicator light will flash red during
use to remind the user to charge the unit. If there is insufficient power, the unit will
automatically stop.
NOTE:
•
The AC adapter may get warm whilst charging. This is normal.
•
To ensure the longevity of the battery and the product's lifespan, recharge
the vacuum cleaner whenever the battery has run out even if you do not plan
to use it.
Make sure the vacuum cleaner is off. You can charge the unit when it is fully assembled, or
you can remove the battery pack by pressing the battery pack release button and sliding
the battery pack out of the main unit.
Reinsert the battery pack into the main unit after charging making sure it clicks firmly
into place.
Securely connect the AC adapter cable to the battery charging port on the end of the main
unit. Then, firmly plug the AC adapter into a suitable mains socket.
•
The battery charging indicator will appear on the control panel and the circular battery
indicator light will flash white while the unit is charging.
•
Once the unit is fully charged, the white circular battery indicator light will display constantly
(steady) for 1 minute and then the LED screen will turn off.
•
It takes approximately 3.5 hours to fully charge the battery. Fully charge the battery
before first use.
•
Once fully charged, the vacuum cleaner has a usage time of approximately:
Power level
High (level 6)
Medium (level 4)
Low (Level 1)
Usage time (minutes)
10
15
40
8
EN
