Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
•
To reassemble, slide the bristle or roller bar back into the compartment. Put a coin into
the coin slot on the bristle/roller bar lock. Twist the coin towards the lock symbol . Make
sure the bristle/roller bar spins smoothly.
Cleaning the wheels
If thread or dirt is jamming one of the wheels, carefully insert a screwdriver under the
wheel axle and push upwards to prise it out. Remove any thread or object jamming
the wheel.
Reposition the wheel by firmly pressing it back into its compartment. Make sure it
spins smoothly.
Cleaning the accessories
Separate the tube from the accessories or the handheld vacuum. Remove any obstructions
and wash with water. Dry thoroughly before using the unit again or putting it away for a long
period of time.
Cleaning with the multi-purpose tool
When cleaning any part of the vacuum, the multi-purpose tool can be used to remove dust
and debris from any of its hard-to-clean areas, such as the filters and their compartments.
Clearing blockages
Small objects, carpet fibres, etc., can occasionally jam the vacuum
cleaner.
• If you notice a blockage or loss of suction during use, turn off
the vacuum cleaner.
• Detach the extension tube and/or vacuum tool to find the
blockage and clear it.
Troubleshooting
Use this troubleshooting guide to resolve any common problems that you may encounter with
the unit. If the problem persists, do not use the unit and contact an authorised repair centre
to have it inspected and if necessary, repaired.
14
EN
