Idiomas disponibles
Idiomas disponibles
B
Product usage
NOTE:
•
When vacuuming heavily soiled surfaces, regularly turn the unit off and check
the mouth of the tool is clean to avoid scratching delicate surfaces.
•
To prevent blocking the vacuum, remove large pieces of waste, such as paper
or plastic, from the area before vacuuming.
Installing the wall mount
NOTE:
•
Securely install the wall mount on a wall that is strong enough to support
the weight of the unit.
•
Install the wall mount in a dry area, away from extreme heat or cold, and
ideally close to a mains socket.
The wall mount (with the supplied wall plugs, screws and adhesive wall mount pad) can be
installed to easily store the vacuum cleaner.
Place the wall mount pad on the wall, leaving a space of at least 107 cm between the floor
and the bottom of the wall mount pad. Mark the drill holes for the screws with a pencil.
Then, drill the holes and insert the wall plugs. Insert the screws and tighten them with
a screwdriver making sure they sit proud approx. 5 mm from the wall. Remove the white
adhesive covers from the adhesive wall mount pad and attach it to the back of the wall
mount bracket (making sure all holes are aligned). Then stick the wall bracket onto the
wall, again making sure all the holes are aligned.
DANGER! RISK OF ELECTRIC SHOCK
•
Do not pierce the electric cables or water pipes located in the wall.
•
Do not install the wall mount on a metal wall.
11
EN
