Qilive Q.5476 Manual De Instrucciones página 9

Curtains and delicate
fabrics (Min. setting)
Press the left suction power button (-) to reduce the suction power. Press the right suction
•
power button (+) to increase the suction power. The symbol for the current suction power lights
up.
5.4. USING THE AIR INLET VALVE
You can easily reduce the suction power for a short time, for example, to
prevent a rug or other textile flooring from being sucked up.
Slide the air inlet valve on the handle backward to reduce the suction
•
power. Slide it forward to increase the suction power.
6. MAINTENANCE AND CLEANING
6.1. REPLACING THE DUSTBAG
The dustbag is located in the dust compartment and cleans the air after it enters the vacuum
cleaner. When the full dustbag indicator lights up in red, you need to replace the dustbag.
1. Turn off and unplug the appliance.
2. Press the locking lever for the dust compartment lid and open the lid as far as it will go.
3. Take out the dustbag holder.
4. Pull the dustbag out of the holder by the grip on the collar.
5. Fit a new dustbag into the holder as far as it will go. Leave the dustbag folded up.
6. Replace the dustbag holder.
7. Close the dust compartment lid, making sure it clicks into position. Take care not to trap the
dustbag when doing so. Note: A safety device prevents the lid from closing without a dustbag
in place. Do not force it.
1
2
4
6.2. CLEANING THE MOTOR PROTECTION FILTER (FIGURE 1)
Textiles and Floor coverings such
upholstery
as rugs or economical
2
3
9
setting for carpets
Hard floors, heavily
soiled rugs and
carpets (Max. setting)
3
2
EN