Section 3 - Configuration
If you selected Add Port Forwarding
Add Port Forwarding
The IP address you want to allow port forwarding on.
Destination IP Address
Select the protocol for ports that you want to allow or
Protocol
deny access to. Choose between TCP, UDP or Other.
If you select Other you will be asked to specify the
protocol in addition to the ports.
Select the port number or numbers for your service
Private Port
on your local network. Enter a single port or a range.
If entering multiple ports, separate port numbers
with a comma.
Select the port number or numbers for your service
Global Port
to be exposed to the Internet. Enter a single port
Destination Port Range
or a range. If entering multiple ports, separate port
numbers with a comma.
Click Apply to save your changes.
D-Link DWR-932C User Manual
44
