Idiomas disponibles
Idiomas disponibles
GB
•
Clean the machine before using it for the fi rst time as described below under
„Cleaning".
•
Place the machine on a suitable working surface.
General
1. Set up the parts as shown in the illustration and ensure that they are fi rmly in
place.
2. Put a container under the outlet.
3. Ensure that the function switch is set to "0/Off".
4. Insert the plug in a duly installed 230V/50Hz protective contact socket.
Short Time Operation
Do not use the machine for more than 5 minutes. Before using it again please let it
cool down for at least 2 minutes.
Meat mincer (see ABB. 1)
1. Cut the food into pieces, put them in the filler slot, and push them in with the
feeder piece after switching the appliance on.
2. Switching the appliance on.
Making sausages (see ABB. 2)
1. Install the sausage-maker head as per ABB. 2 - without the cutter and grating.
The long one is used to make thin sausages, and the thick one is used to
make thick sausages.
2. Soak a sausage skin, tie the end of it, and draw it over the sausage-maker
head.
3. Fill the feeder nozzle with minced meat (add spices or herbs as desired).
4. Switching the appliance on.
Switching-off
Turn the device off by the switch and remove the mains plug.
•
Before cleaning remove the mains lead from the socket.
•
For cleaning the outside of the machine use only a damp washing-up cloth.
•
Do not use any sharp or abrasive detergents.
•
Both accessories can be cleaned in soapy water.
30
6....-05-FW 2924 30
First Use of the Machine
Operation
Cleaning
10.02.2005, 12:00:36 Uhr
