Panasonic CQ-DFX972U Manual De Instrucciones página 61

Idiomas disponibles

Idiomas disponibles

□ General
Power supply:
12 V DC (11 V-16V), test voltage 14.4 V, negative ground
Current consumption:
Less than 2.2 A (CD play mode; 0.5 W x 4 channels)
Maximum power output:
50 Wx4 channels at 1 kHz, volume control maximum
Tone adjustment range:
Bass:
±12 dB at 100 Hz
Treble:
±12 dB at 10 kHz
Suitable speaker impedance:
4-8 O
Preamp output voltage:
5 V (CD play mode; 1 kHz, 0 dB)
Subwoofer output voltage:
5 V
Pre-Amp output impedance:
60 Q
Subwoofer output impedance: 60 Q
Dimensions (WxHxD):
7"x115/i6"x57/a" (178x50x150 mm)
Weight:
3 lbs. 8 oz (1.6 kg)
□ FM Stereo Radio
Frequency range:
87.9 MHz-107.9 MHz
Usable sensitivity:
11.0 dBf. (1.25 |iV, 75 Q)
50 dB quieting sensitivity:
15.2 dBf. (1.6 |iV, 75 Q)
Frequency response:
30 Hz-15 kHz (±3 dB)
Alternate channel selectivity:
75 dB
Stereo separation:
35 dB (1 kHz)
Image response ratio:
75 dB
IF response ratio:
100 dB
Signal/noise ratio:
70 dB
□ AM Radio
Frequency range:
530 kHz—1 710 kHz
Usable sensitivity:
29 dB/pV (25 tiV, S/N 20 dB)
□ CD Player
Sampling frequency:
8 times oversampling
DA converter:
MASH-1 bit/4 DAC system
Error correction system:
Panasonic super decoding algorithm
Pick-up type:
Astigma 3-beam
Light source:
Semiconductor laser
Wave length:
780 nm
Frequency response:
20 Hz—20 kHz (±1 dB)
Signal/noise ratio:
96 dB
Total harmonic distortion:
0.01 % (1 kHz)
Wow and flutter:
Below measurable limits
Channel separation:
75 dB
MP3 decoding:
MPEG 1 Audio Layer 3/MPEG 2 Audio Layer 3
Bit rate:
(MPEG 1 Audio Layer 3) 32 kbps-256 kbps, VBR (Variable Bit Rate)
(MPEG 2 Audio Layer 3) 16 kbps-160 kbps, VBR (Variable Bit Rate)
Sampling frequency:
(MPEG 1 Audio Layer 3) 32 kHz, 44.1 kHz, 48 kHz
(MPEG 2 Audio Layer 3) 22.05 kHz, 24 kHz
Above specifications comply with EIA standards.
Note:
o Specifications and the design are subject to modification without notice due to improvements in technology.
loading