Idiomas disponibles
Idiomas disponibles
Information codes
The washer may display information codes to help you understand what is occurring with
your washer better.
Code
Lid is open when washer is running.
Hot LED
•
Flashes
•
Warm LED
Communication error between SUB PBA and MAIN PBA.
Flashes
•
Eco Warm
A button is not working properly.
LED Flashes
•
The Water Level sensor is not working properly.
Cool LED
When the Cool LED is flashing, the washer drains for 3 minutes. During
Flashes
this time, the POWER button is inoperative.
•
Your Washer has tried to fill but was unsuccessful.
When the Extra High LED is flashing, the washer drains for 3 minutes.
During this time, the POWER button is inoperative.
•
Extra High
LED Flashes
•
•
Check if the hot water supply hose is connected.
•
DC68-03850F-04_IB_WA3000A_EN.indd 49
DC68-03850F-04_IB_WA3000A_EN.indd 49
Close the lid tightly and restart the cycle.
If the information code remains, contact a customer service center.
If the information code remains, contact a customer service center.
If the information code remains, contact a customer service center.
NOTE
If the information code remains, contact a customer service center.
NOTE
Make sure the water faucets are open all the way. Check for kinked
hoses.
Check the inlet screens on the fill hoses.
If you use a Flood Safety Device, remove the device and connect the
water hoses directly to the unit.
You must connect the hot water supply hose because hot water is
supplied by the Auto Temperature Control (A.T.C.) function.
Meaning
English 49
2023-06-23
2023-06-23
11:52:37
11:52:37
