Idiomas disponibles
Idiomas disponibles
Step-by-step installation
STEP 1 Selecting a location
NOTE
Before you install the washer, make sure the location:
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
•
Is away from direct sunlight.
•
Has adequate ventilation.
•
Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
•
Is away from heat sources such as oil or gas.
•
Has enough space so that the washer doesn't rest on its power cord.
STEP 2 Connecting the water supply hose
DC68-03850F-04_IB_WA3000A_EN.indd 21
DC68-03850F-04_IB_WA3000A_EN.indd 21
CAUTION
Before installing the water supply hoses,
make sure there are rubber gaskets (B)
inside the couplings (A) at both ends of each
new water hose. Installing the water supply
hoses without rubber gaskets can cause
water leakage.
CAUTION
B
When you initially install the washer, be
sure to use new hoses. Failing to do so may
result in a water leakage or overflow and
may damage your property.
A
CAUTION
Do not connect multiple water supply hoses
together to increase the length of the supply
hose. Hoses connected this way can leak
and the leakage can cause electrical shock. If
a hose is too short, replace the hose with a
longer, high pressure hose.
English 21
2023-06-23
2023-06-23
11:52:32
11:52:32
