Idiomas disponibles
Idiomas disponibles
4.9.2 How to insert a shelf
1.
Pull the runners out as far as they will go.
2.
Place the back of the shelf on the runners behind the pins.
3.
Push the shelf into the appliance and press down at the
front until it clicks into the front pins.
4.
Push the shelf back into the appliance as far as it will go.
PLEASE NOTE
Make sure that the shelves are fi rmly engaged in place before
storing any bottles.
Spread your bottles out as evenly as possible over the shelves.
Do not store bottles in the appliance unless they are on a
shelf, otherwise they may fall out when the appliance door is
opened. This may cause injury or material damage.
To ensure that the door shuts correctly, make sure that shel-
ves are pushed into the appliance as far as they will go.
4.9.3 Wooden shelf with tipping equipment for
presentation
The lower wooden shelf does not have ball bearing runners. It can
be used to store 11 bottles. The shelf can easily be lifted up and
removed.
In addition to this, tipping equipment can be installed to present
12 bottles evenly and fl ush with the bottom edge of the applian-
ce's viewing window (see "Storing bottles").
1.
Remove all the bottles.
2.
Remove the lower wooden shelf.
3.
The underside of the shelf has pre-drilled holes.
4.
Insert the stainless steel fi ttings into the holes.
5.
Replace the reconfi gured shelf in the appliance.
PLEASE NOTE
When removing bottles make sure that the wooden shelf
with the tipping fi ttings is not attached to the inside of the
wine cooler.
4.10 Options for bottle storage
The specifi cation of the maximum bottle storage refers to
standard Bordeux bottles with a height of max. 310 mm and a dia-
meter of max. 76 mm.
4.10.1 Pyramid storage
A total of 17 bottles can be stored.
4.10.2 Bottle storage with tipping equipment
for presentation
To present 12 bottles evenly and fl ush with the bottom edge
of the appliance's viewing window, you can attach the tipping
fi ttings to the bottom shelf.
CASO WineDeluxe WD 17
DE
EN
FR
IT
ES
NL
RUS
SE
PT
27
