CASO DESIGN WineDeluxe WD 17 Manual Del Usuario página 26

3.
Remove the screws in Position 2 and move them to Position
DE
3. Remove the screws in Position 1 and align the door,
4. then tighten the screws in Position 1 and 3.
EN
FR
IT
ES
NL
RUS
2
1
SE
PT
X
2
1
5. Replace the covers and
6.
the door seal.
7.
To align the door in Direction Z, adjust the height of the feet.
26
CASO WineDeluxe WD 17
3
3
4.8 How to open the door
•
When the appliance has been fully installed and switched on,
gently press the door frame to open the door. The sensor will
react and the door will open a little. Then pull the door fully
open by hand.
•
If the appliance is not switched on or the plug is not in the
socket, then you will need to use the supplied suction cup
to open the door. Place the suction cup in the middle of the
door frame and then carefully pull the door open a little. Then
pull the door fully open by hand.
4.9 Wooden shelves
The upper wooden shelf has ball bearing runners which can be
used to pull it out and push it in like a drawer. The runners click
into place when the shelf is pushed back into the appliance as
far as it will go, fi xing it inside the appliance.
4.9.1 How to remove a shelf
1.
Pull the shelf as far out of the appliance as it will go and
remove the bottles.
2. Lift the shelf up to detach it from the runners.
3. Remove the shelf from the appliance.