Idiomas disponibles
Idiomas disponibles
Keep chain sharp. Your saw will cut faster and more safely. A dull chain will cause undue sprocket, Guide
Bar, chain, and motor wear. If you must force chain into wood and cutting creates only sawdust with few
large chips, chain is dull.
FOR BATTERY TOOLS
The ambient temperature range for the use and storage of tool and battery is 32 °F-113 °F (0
The recommended ambient temperature range for the charging system during charging is 32 °F-104 °F
(0
C-40
C).
o
o
TROUBLESHOOTING TABLE
The following table gives checks and actions that you can perform if your machine does not operate
correctly. If these do not identify/remedy the problem, contact your service agent.
WARNING: Switch off and remove the battery pack before investigating fault.
Symptom
Pruning saw fails to
operate
Pruning saw
operates
intermittently
Chain/chain bar
over-heats
EN
Pruning saw rips,
vibrates, does not
saw properly
16
Possible Cause
Out of battery.
Fuse faulty.
Over heating
Applying too much pressure
while cutting.
Loose connection.
Internal wiring defective.
On/Off Trigger defective.
Chain is over tensioned
Dull chain
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the
wrong direction
Remedy
Charge the battery pack.
Replace fuse.
Place the machine in a cool, ventilated
place to cool it down
Applying relatively less pressure while
cutting
Contact service agent.
Adjust chain tension
Sharpen chain or replace
Adjust chain tension
Sharpen chain or replace
Replace chain
Reassemble with chain in correct
direction
C-45
C).
o
o
