Idiomas disponibles
Idiomas disponibles
Troubleshooting
Sound cannot be heard from the
speakers.
"MISWIRING CHK WIRING THEN RESET
UNIT" / "WARNING CHK WIRING THEN
RESET UNIT" appears on the display and
no operations can be done.
The unit does not work at all.
"F-AUX" or "R-AUX" cannot be selected. Check the <SRC SELECT> = <F-AUX / R-AUX> setting. (page 15)
Sound is sometimes interrupted while
listening to an external component
connected to the auxiliary input jack.
The correct characters are not displayed
(e.g. album name).
SSM automatic presetting does not
work.
Static noise while listening to the radio. Connect the antenna firmly.
"AM" cannot be selected.
Disc cannot be played back.
CD-R/CD-RW cannot be played back
and track cannot be skipped.
Disc sound is sometimes interrupted.
"NO DISC" appears on the display.
"PLEASE" and "EJECT" appear
alternately on the display.
"IN DISC" appears on the display.
Disc cannot be played back.
Noise is generated.
"READING" keeps flashing on the
display.
Tracks do not play back in the order you
have intended them to play.
The elapsed playing time is not correct.
"READING" keeps flashing on the
display.
16
ENGLISH
Symptom
Remedy/Cause
Adjust the volume to the optimum level. / Make sure the unit is not
muted/paused. (page 6) / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with
insulating tape properly, then reset the unit. (page 3)
If the message does not disappear, consult your JVC car audio dealer
or a company supplying kits.
Reset the unit. (page 3)
Check to be sure the recommended stereo mini plug is used for
connection. (page 9)
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
Store stations manually.
Check the <SRC SELECT> = <AM> setting. (page 15)
Insert the disc correctly.
Insert a finalized CD-R/CD-RW (finalize with the component which
you used for recording).
Stop playback while driving on rough roads. / Change the disc. /
Check the cords and connections.
Insert a playable disc into the loading slot.
Press 0, then insert a disc correctly.
The disc cannot be ejected properly. Make sure nothing is blocking
the loading slot.
Use a disc with MP3/WMA tracks recorded in a format compliant
with ISO 9660 Level 1, Level 2, Romeo, or Joliet. / Add the extension
code <.mp3> or <.wma> to the file names.
Skip to another track or change the disc.
A longer readout time is required. Do not use too many hierarchical
levels and folders.
The playback order is determined when the files are recorded.
This sometimes occurs during playback. This is caused by how the
tracks are recorded on the disc.
A longer readout time is required. Do not use too many hierarchical
levels and folders. / Turn off the power then on again. / Reattach the
USB device again.
