Idiomas disponibles
Idiomas disponibles
B
Product installation
SELECTION OF INSTALLATION EQUIPMENT
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved around
the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant
and insulated work surface material (Wood and similar fibrous or hygroscopic material shall
not be used as work surface material unless impregnated) to avoid the electrical shock and
larger deformation caused by the heat radiation from the hotplate. As shown below:
NOTE:
The safety distance between the sides of the hob and the
inner surfaces of the worktop should be at least 3mm.
H
D
X
L(mm)
W(mm)
590
520
Under any circumstances, make sure the ceramic cooker hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the ceramic cooker hob is in good work state. As
shown below.
A
B
Using the appliance
L
X
X
H(mm)
D(mm)
51
47
E
W
X
A
A(mm)
B(mm)
560+2
480+2
-
6
EN
SEAL
Min. 3mm
X(mm)
F(mm)
50 mini
3 mini
-
