Idiomas disponibles
Idiomas disponibles
C
Useful information
Cleaning and maintenance
What?
1. Switch the power to the cooktop
Everyday
soiling on glass
2. Apply a cooktop cleaner while
(fingerprints,
marks, stains
left by food or
3. Rinse and wipe dry with a clean
non-sugary
spillovers on the
4. Switch the power to the cooktop
glass)
Remove these immediately
with a fish slice, palette knife
or razor blade scraper suitable
for Ceramic glass cooktops,
but beware of hot cooking zone
surfaces:
Boilovers, melts,
1. Switch the power to the cooktop
and hot sugary
spills on the
2. Hold the blade or utensil at
glass
3. Clean the soiling or spill up
4. Follow steps 2 to 4 for 'Everyday
1. Switch the power to the cooktop
2. Soak up the spill.
3. Wipe the touch control area
Spillovers on the
touch controls
4. Wipe the area completely dry
5. Switch the power to the cooktop
How?
off.
the glass is still warm (but not
hot!)
cloth or paper towel.
back on.
off at the wall.
a 30° angle and scrape the
soiling or spill to a cool area of
the cooktop.
with a dish cloth or paper towel.
soiling on glass' above.
off.
with a clean damp sponge or
cloth.
with a paper towel.
back on.
20
Important!
• When the power to the cooktop
is switched off, there will be no
'hot surface' indication but the
cooking zone may still be hot!
Take extreme care.
• Heavy-duty scourers, some
nylon scourers and harsh/
abrasive cleaning agents may
scratch the glass. Always
read the label to check if your
cleaner or scourer is suitable.
• Never leave cleaning residue
on the cooktop: the glass may
become stained.
• Remove stains left by melts
and sugary food or spillovers
as soon as possible. If left to
cool on the glass, they may
be difficult to remove or even
permanently damage the glass
surface.
• Cut hazard: when the safety
cover is retracted, the blade in
a scraper is razor-sharp. Use
with extreme care and always
store safely and out of reach of
children.
• The cooktop may beep and turn
itself off, and the touch controls
may not function while there
is liquid on them. Make sure
you wipe the touch control area
dry before turning the cooktop
back on.
EN
