Idiomas disponibles
Idiomas disponibles
EN
Wear it properly
The wristband is best worn after the ulnar styloid Adjust the size of the wrist according to
the adjustment hole; Buckle belt buckle. The sensor should be close to the skin to avoid
moving
Charge the bracelet
For the first time, make sure that the battery is in normal power. lf the power is not turned
on normally, please connect the charger to charge the device, and the bracelet will
automatically turn on. Take out the device body from the strap. Put th USB with metal side
into the charger or to the computer USB interface for charging.
lnstall the bracelet app on your phone
Sean the QR cede or go to the App Store, app download and install the app.
System Requirements:Android 5.0 or above; iO59.0 or above;Support for Bluetooth 4.0.
Device connection
For the first time, you need to connect to the APP for calibration. After the connection is
successful, the bracelet will automatically synchronize the time.
•
Open the phone app
•
After the pairing is successful, the APP will automatically save the Bluetooth address
of the bracelet, and when the APP is opened or running in the background, it will
automatically search and connect the bracelet;
•
Android mobile phone Please ensure that the APP runs in the background and the
mobile phone system settings are given ali permissions such as running the
background and reading the contact information.
Bracelet function description
•
When the device is turned off, touch and hold the function button for more than 3
seconds to turn the device on.
•
In the Bluetooth address interface of the bracelet, press and hold the 2 second
wristswitch to turn off the phone. Short press will exit the shutdown page.
•
Bracelet reset device This function will clear all data of the bracelet (such as step
counting).
•
Under the power on state, touch the short press function key to light up the screen.
•
Whether the default clock page of the bracelet, press the short press function key to
switch to view different pages, no operation default five-second screen.
•
Switch to the heart rate three-in-one interface to start the test, heart rate three-in-one
interface 60s timeout automatically off screen (heart rate and blood pressure need
bracelet hardware support).
click to start scanning
5
click on the device connection
