Idiomas disponibles
Idiomas disponibles
6. Place the lower door on a smooth
surface with its panel upwards. Un-
screw screw ③ and take down part
② and part ①. Install replacement
door stopper-left ④ and stop block-
left ⑤ (provided in the plastic acces-
sory bag) to the left side with screw
③. Keep part ① and part ② with the
appliance for future reference.
7. Install screw hole cover-right ①(pro-
vided in the plastic accessory bag)
to the right-top corner of the cabi-
net. Remove screw hole cover-left
② from the left-top corner of the
cabinet with thin-blade screwdriver
and put the screw hole cover left and
upper hinge-right into the plastic ac-
cessory bag for future reference.
8. Change screw hole covers and screw
on middle cover plate from left to
right (as shown in figure below).
9. Lie the refrigerator backwards. Re-
move part ④ (right). Remove 3
self-tapping screws from the low-
er hinge -right. Unscrew the lower
hinge-right axis then install it on the
reverse hole site, and tighten into
position (change it into lower hinge-
left). Remove the lower hinge-left to
the left-bottom corner of the cabi-
net, then fix it with 3 screws. Final-
ly install part ④ on the left-bottom
corner and right-bottom corner of
cabinet.
9
