Idiomas disponibles
Idiomas disponibles
2. When defrosting is completed, clean
your freezer as described above.
Caution! Do not use sharp objects to
remove frost from the freezer compart-
ment. Only after the interior is completely
dry should the appliance be switched
back on and plugged back into the mains
socket.
Door seals cleaning
Take care to keep door seals clean. Sticky
food and drinks can cause seals to stick
to the cabinet and tear when you open
the door. Wash seal with a mild detergent
and warm water. Rinse and dry it thor-
oughly after cleaning.
Caution! Only after the door seals are
completely dry should the appliance be
powered on.
Replacing the LED light:
Warning: The LED light should be re-
placed by a professional. If the LED light
is damaged, contact the customer help-
line for assistance. To replace the LED
light, the below steps can be followed:
1. Unplug your appliance.
2. Push the 3 buttons to the back of the
control display part with a thin blade
screwdriver, and then pull it down-
ward.
3. Hold the control display part with
one hand and pull it with the other
hand while pressing the connector
latch.
4. Replace LED light and snap it correct-
ly in place.
19
