Idiomas disponibles
Idiomas disponibles
WARNING:
Before inspecting, cleaning, or servicing the machine,
shut off engine or motor, wait for all moving parts to stop,
and disconnect spark plug wire and move it away from
spark plug or disconnect from power supply. Failure to
follow these instructions can result in serious personal
injury or property damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 as well as hearing protection
when operating this product. Wear head protection when
operating this equipment above shoulder level. Failure to
do so could result in objects being thrown into your eyes
and other possible serious injuries.
WARNING:
When servicing, use only recommended or equivalent
replacement parts. Use of any other parts could create
a hazard or cause product damage.
NOTICE:
Periodically inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or a quali-
fied service center for assistance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
MAINTENANCE
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic, which may result in serious personal injury.
WARNING:
Blades are sharp. To reduce the possibility of serious
injury, always wear gloves when performing maintenance
on the hedge trimmer blades. When handling blade
assembly, do not place your hand or fingers between
blades or in any position where they could get pinched or
cut. NEVER touch blades or perform maintenance while
the hedge trimmer attachment is attached to the engine.
BLADE CARE
„ Lubricate the cutting blade after each use.
„ Periodically inspect the blade for damage and wear.
„ If it becomes necessary to have the blade replaced, take
the hedge trimmer to a qualified service center.
LUBRICATING THE BLADE
See Figure 7.
For easier operation and longer blade life, lubricate the blade
before and after each use.
„ Lay hedge trimmer on a flat surface.
„ Use a brush to remove debris or clippings from the blade.
Wipe any remaining debris away with a clean cloth.
„ Apply light weight machine oil along the edge of the top
blade. Wipe any excess oil from the blade.
Occasionally, you should oil the hedge trimmer during use.
Before oiling, stop the hedge trimmer, remove the attach-
ment, then oil. You can then resume trimming. Do not oil
while hedge trimmer is running.
8 — English
