cecotec CONGA ROCKSTAR 11500 ODYSSEY ERGOFLEX Manual De Instrucciones página 49

1. Press the Dirt-tank opening button, marked with the word "CLEAN", and pull on the metallic
handle to remove the filtering system.
2. Once the filtering system is out, turn the metallic handle counterclockwise and you will
be able to take the high efficiency filters out.
- Vacuum and shake the filters to remove every dirt that may block them and hinder correct
air circulation. Remember not to use the vacuum cleaner without the filters properly
assembled.
- Filters cannot be washed inside a washing machine nor dried with a hair dryer.
- Do not brush the high-efficiency filter.
- To empty the dirt tank, press the dirt tank lower cover opening button, open it, and empty
it. Fig. 13
Cleaning the Jaliscazo brush
Fig. 14
- Move the rotary-brush release button with one finger toward the arrow and remove the
cover on the same side of the brush.
- Take one end of the brush out as shown on the image.
- It is important to clear and clean all the residues left in the brush's rotary axis.
- If you decide to wash the brush, all parts must be left to dry. Assemble the pieces back in
order to use the brush again.
Removing the battery
Press the battery release button and remove the battery as shown in figure 15. Store the
battery in a plastic bag and leave it in a dry place.
Storing the vacuum cleaner
If the robot is not going to be used for a long time, remove the battery, and store it in a dry and
safe place.
Maintenance indicator
The full tank icon or the clogged filter icon will be displayed if maintenance on the vacuum
cleaner has not been properly and frequently carried out. Fig. 16
CONGA ROCKSTAR 11500 ODYSSEY ERGOFLEX
ENGLISH
49