cecotec CONGA ROCKSTAR 11500 ODYSSEY ERGOFLEX Manual De Instrucciones página 45

Support Service.
- Fully charge the device before the first use.
- Remove the first-use tab installed in the filter.
- During the first 3 uses, it is recommended to charge the device for 12 hours between uses.
- The normal charge time is 6 hours approx. When the battery is fully charged, unplug it.
Box content
- Rockstar 11500 Odyssey Ergoflex vacuum cleaner
- 2-in-1 narrow accessory for corners and furniture
- 2-in-1 wide accessory for corners and furniture.
- Jaliscazo brush
- Long brush
- Special brush for fabrics
- Flexible vacuuming tube
- Extensible tube
- Wall bracket with charging function
- Instruction manual
3. PRODUCT ASSEMBLY
Assembling the suction tube and vacuum head
- To install the vacuum head on the suction tube, align both parts so that the tab on the
vacuum head and the suction tube guides match, and insert the tube into the vacuum head
until it clicks into place.
- To disassemble them, press the vacuum-head release button, and pull from the suction
tube while you hold the vacuum head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Assembling the suction tube, vacuum head, and main body
To complete the vacuum cleaner's installation, once the vacuum head is mounted on the
suction tube, hold the tube vertically and insert it into the main body.
Assembling the battery
Fig. 3
- Insert the battery in the corresponding slot on the main body. Once inserted, it will click
into place. Make sure it's secured in position.
CONGA ROCKSTAR 11500 ODYSSEY ERGOFLEX
ENGLISH
45