Jaliscazo brush
To be used with the upright vacuum cleaner. This brush is especially designed for cleaning hard
floors, but can be used to efficiently clean soft floors too.
2-in-1 narrow accessory for corners and furniture
Fig. 4
This accessory is preferably used with the handheld vacuum cleaner and allows cleaning
furniture without damaging it and reaching less accessible dirt in corners.
2-in-1 wide accessory for corners and furniture
Fig. 5
This accessory is preferably used with the handheld vacuum cleaner and allows cleaning
furniture without damaging it and reaching less accessible dirt in corners.
Long brush
Fig. 6-7
Suitable for cleaning surfaces which are sensible to scratches such as furniture, wardrobes,
etc.
Special brush for fabrics
Adjustable accessory to remove all types of dust trapped in fabrics.
Flexible vacuuming tube
Use the Flex tube to reach and vacuum dirt from the most inaccessible areas. Press the Flex
button to bend the tube.
Extensible tube
Use the accessory with the handheld vacuum cleaner to reach and vacuum dirt from the most
inaccessible zones. Moreover, you can connect the 2-in-1 narrow and wide accessories for
furniture and corners and the long brush.
Wall charging base installation
Fig. 8
1.
Place the charging base on the wall and mark 3 spots to be drilled to fix the base. You must
take into account the height of the installation; it is important that vacuuming brush head
rests on the floor to avoid the charging base from holding all the vacuum cleaner's weight.
2. Drill the 3 holes (previously marked) and insert the pegs and M4 x 32 mm screws.
3. Make sure that the charging base is securely fixed on the wall and place the vacuum
cleaner on the charging base by placing the vacuum cleaner's charging terminals over the
charging base's charging terminals (plastic tab).
4. Once the wall charging base is installed, connect the power adapter to the charging port,
CONGA ROCKSTAR 11500 ODYSSEY ERGOFLEX
ENGLISH
47