Idiomas disponibles
Idiomas disponibles
Charger LHW/A
Protection class II device
Please do not dispose of this electrical de-
vice, the charger and the battery with the
household waste!
WARNING
Always wear protective goggles
Description of the machine
The user who frequently uses his long-neck
angle grinder in cramped spaces will apprecia-
te the device. A slender shape, imposing power
and a comprehensive range of accessories
make the LHW/A the ideal tool for deburring,
rough-machining, precision polishing, round-
ing off edges, colour removal, removing rust,
separating small parts and sharpening of tools.
The LHW/A can easily machine many materials,
such as for example steel, non-ferrous metals,
glass, wood and ceramics. Ideally suited for
model, tool and mould construction, but also,
for example, in the motor vehicle sector or for
repairs to vehicles. The fl at end cap of the bat-
tery enables the tool to stand upright as well.
The defl ection is achieved through the precise,
double ball-bearing bevel gear. It is driven by
a powerful special motor which is effi ciently
force-cooled against overheating. A sanding
disc of high-grade corundum (grit 60), a fan
sander (grit 100) and a fabric-reinforced cutting
disc are included.
Powerful batteries in lithium-ion technology
and 2.6 Ah capacity guarantee continuous, high
performance work. To charge the battery, it is
simply inserted into the charger and is ready
for operation again within approx. 1 hour. For
your safety the process is thermally monitored.
1 Key (Fig. 1)
1. Lock button
2. Rotational speed regulating knob with On/
Off switch
- 16 -
3. Protective guard
4. Gear head
5. Motor housing
6. Battery
7. Battery release button
8. Sanding disc
9. Charger
2 Technical data
Device:
Rotational speed:
Voltage:
Disc diameter:
Length:
Weight:
Noise generation:
General measuring
uncertainty:
Grip vibration:
Charger:
Mains voltage:
50/60Hz
Output voltage:
Charging current:
Battery:
Rechargeable lithium-ion
battery
Nominal/charging voltage: 10.8V/12.6V
Energy/Capacity:
3 Noise/vibration information
The information on vibration and noise emissi-
on has been determined in compliance with the
prescribed standardised and normative measu-
ring methods and can be used to compare elec-
trical devices and tools with each other.
These values also allow a preliminary evalua-
tion of the loads caused by vibration and noise
emissions.
max. 16.000/min
10.8 V
max. 50 mm
approx. 320 mm
approx. 800 g
≤ 78 dB (A)
K=3dB
2
≤ 2.5 m/s
100-240 V~,
12.6 V
2 A
28.19Wh/2.6 Ah
3 INR 19/66
